In this guide, we have shared with you the steps to Root Realme Narzo 50A Prime RMX3516 using Magisk without TWRP in a very simple way for your ease.

To root your Realme Narzo 50A Prime RMX3516, we will use the Magisk to patch the stock boot image and flash that to your device’s boot partition. Now, if you ask why Magisk? It’s a system-less root process that doesn’t tamper with the system partitions while enabling root access. Magisk can also hide online security measures to work apps properly like any banking app, SafetyNet, etc.

Realme Narzo 50A Prime Device Overview:

The Realme Narzo 50A Prime features a 6.6 inches IPS LCD panel with a 60 Hz refresh rate. It is an FHD+ panel with a 1080 x 2408 pixels resolution and an aspect ratio of 20:9. The screen has a peak brightness of 600 nits. Under the hood, we get the Unisoc Tiger T612 processor built on a 12nm manufacturing process. It is an octa-core processor with two Cortex-A75 cores clocked at 1.8 GHz and six Cortex-A55 cores clocked at 1.8 GHz. For handling the graphics-intensive tasks, we have the Mali-G57. The smartphone comes with Android 11 out of the box with Realme UI 2.0 skin running on it.

In optics, we get a triple camera setup at the rear and a single selfie camera at the front. The triple rear camera setup consists of a 50MP primary sensor paired with an f/1.8 lens, a 2MP macro sensor paired with an f/2.4 lens, and a 0.3MP depth sensor paired with an f/2.8 lens. The selfie camera at the front is an 8MP primary sensor paired with an f/2.0 lens. The rear setup can capture 1080p videos, while the front camera can capture only 720p videos.

The smartphone comes in two storage options: 64GB internal storage + 4GB RAM and 128GB internal storage + 4GB RAM. We also get a dedicated microSD slot for storage expansion. In terms of communications, we get Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, GPS, NFC, and USB Type-C 2.0. And for sensors, we get a side-mounted fingerprint sensor, accelerometer, gyro, proximity, and compass. Powering it all is a 5,000 mAh battery that can be topped up quickly using an 18W power adapter. The smartphone is available in two color options: Black and Blue.

Steps To Root Realme Narzo 50A Prime RMX3516 Using Magisk

Follow the full-depth guide along with the requirements and download the links below.

Keep in mind:

  • Rooting may void the manufacturer’s warranty on your device.
  • Rooting will block the firmware OTA updates.

Now, let’s head over to some of the necessary steps which you need to abide by:

Pre-Requirements

  • You need to unlock the bootloader on any Realme device
  • Your phone should have a battery juice of more than 60%.
  • Keep a backup of your device data at first. Therefore, you can get back the important data if anything goes wrong.
  • The image file in this article is supported by the Realme Narzo 50A Prime model only. DO NOT try to flash it on other models.
  • You will also require a PC/Laptop and a USB cable to connect your device to the computer.
  • You should download all the necessary files, tools, and drivers below accordingly.

Required Downloads:

  • Download ADB & Fastboot files (Windows/MAC)
  • Realme USB Drivers – Download and install it on your computer
  • Download the latest Realme Narzo 50A Prime Firmware Flash File and move it to the PC

1. Download and Extract the OZIP Firmware:

Warning:

1. How to Patch the Boot Image using Magisk?

  • Attach your device via USB cable and copy only the boot.img file from the extracted folder to your device storage
  • Launch Magisk Manager. When a popup appears asking to install Magisk, select INSTALL and choose to install again.
  • Tap on “Patch Boot Image File”.
  • Navigate to internal storage and select your phone’s boot image that you transferred earlier.
  • Wait for a couple of seconds. Magisk will start patching the boot image.
  • Once the boot image has been patched, copy the “patched_boot.img” from the internal storage and replace it in your PC’s same extracted ROM folder.

Now you can follow the second step to flash the patched boot image file.

2. Steps To Install the Patched Boot Image on Realme Narzo 50A Prime

Follow the proper guide to install Patched Boot Image on Realme Narzo 50A Prime from the below link:

  • Now, extract the ADB & Fastboot tool, then move the patched boot image file to the same folder.
  • Press and hold down the Shift key + right-mouse-click to open the command window/PowerShell.
  • Next, enter the following command to flash the “patched_boot.img” to install Magisk and root your Android device:

fastboot flash boot patched_boot.img

  • For devices with an A/B partition system, you have to use the following commands:

fastboot flash boot_a patched_boot.img

fastboot flash boot_b patched_boot.img

Please replace [patched_boot.img] with the name of the boot image file you downloaded, followed by the .img extension.

  • Wait for the flashing process to complete.
  • Finally, type in the command to reboot your device.

fastboot reboot

  • That’s it.

Steps to Verify the Systemless Root

  • Launch the Magisk Manager app on your device.
  • Now, to verify the systemless root access on your phone, you will see the status screen. Here all options should be green ticked if properly rooted. If yes, that means you’ve successfully bypassed the Google SafetyNet measure.

That’s it, guys. We hope you’ve found this guide useful and successfully rooted your Realme Narzo 50A Prime device. For any queries, feel free to ask in the comments below.