Thermal paste transfers the heat produce by the processer to the cooler base of the CPU or GPU. It works almost with every cooler use in computers like Air cooler, AIO cooler, or a liquid cooler. As per computer professional, we have to change thermal paste after every year use of the system to make it works smoothly. Moreover, if it is not changed, then it may harm your system and impact the CPU & GPU performance. The most critical part of changing the thermal paste is removing it. So in this guide, we will learn about removing thermal paste from your CPU or GPU and replacing it with a new one.
The heating of the CPU and GPU is one of the common and major issues in computers. But, unfortunately, we always neglected the horrible sound and the abnormal heat coming from our CPU and GPU components. Thermal paste is a clever solution to control the heat and provide cooling to the components of CPU & GPU by the manufacturers. Still, as we use our system to run heavy software or play high-end graphics games, the system generates heat, and the thermal paste is needed to be check and replaced from time to time.
How to Remove Thermal Paste From Your CPU or GPU?
Removing the thermal paste is mostly used to decrease the heat and increase the system’s life, but it’s not an easy task as it concerns opening up and de-assembling the system hardware. Therefore, we need to follow the process carefully. Here we learn step by step process to remove the thermal paste from CPU/GPU.
After a certain period of usage, the thermal paste turns hard and becomes unable to transfer the heat required. Due to this, your system will run slow, heat up frequently, and you will notice a performance decrease of your system. One side effect of failed thermal paste is your CPU and GPU running fans constantly dissipate heat and making a lot of nice in the process. So if this is something you are currently facing, then this is the right time to remove the thermal paste from your CPU and GPU and replace it with a new one.
Requirements
To remove the thermal paste from your CPU/GPU, we need a good quality of the thermal paste. There are a lot of thermal paste tubes available that you can buy as per your budget and based on customer reviews and ratings in the online and offline market. Also, it would help if you had some clothes or cotton buds to clean the thermal paste. The experts always use Alcohol to clean all the dust and thermal compound from the chip and a screwdriver to open the system. If you have all the items, then move to the below process.
Remove Thermal Paste From Your CPU
Before moving to the first step, please turn off your system and remove all the plugs so that you can remove the thermal paste without any difficulty.
Thermal paste is a heat conductive material, and it is not easily available in all areas. We recommend you buy such items online and wait for them to ship to your local address. If you don’t have a thermal paste with you and need to replace the old one due to some emergency, you may also use toothpaste as an alternative to the thermal paste. The life of toothpaste is much lower, and it only lasts two months compared to a good quality thermal paste.
- Open the CPU case, and for the Laptop, unscrew the backside.
- Now unplug the heatsink or CPU cooler from the CPU (It is the biggest thing and in the middle section in your motherboard).
- After that, take the Alcohol in the tissue/cotton and rub the backside of the CPU cooler to clean the thermal paste.
- Clean it properly and make sure there should not be any single particle of old thermal paste.
- Next, put the new thermal paste on the CPU.
- Do not apply access thermal paste in the CPU. However, you can simply make a cross of thermal paste on the CPU.
- Now with the help of a paintbrush, apply the thermal paste all over the CPU.
- After that, Wait for a few minutes, mount the CPU cooler again, and screw it properly.
Remove Thermal Paste From Your GPU
Again follow the above process of shut the computer and unplug all cables, including the power cable. GPU is also a delicate part of the system, so be careful not to mess around it.
- Open the CPU case, and for the Laptop, unscrew the backside.
- Now unplug all the connected cables of the GPU.
- Unmount the GPU from the PCI Express socket.
- After that, unscrew required screws of the GPU to remove the fans.
- Now unplug the heatsink or cooler.
- In the thin metallic plate, you will see a small chip in the middle, like a microprocessor of GPU. Also, there may have some old thermal paste is on the above of the microprocessor.
- Now take the cotton and dip it into the Alcohol and clean all the old thermal paste gently.
- After that, apply the new thermal paste on the chip in an X shape.
- Spread the paste with a paintbrush and wait for few minutes.
- Next, Plugin back the cooler or heatsink and screw the GPU. Now Close the CPU with all screws.
Conclusion
That’s all about the necessary steps to remove the Thermal paste from your CPU/GPU, but make sure to gently apply the thermal paste to your system. If you have any questions regarding the above and then share your experience, let us know in the comment box.
- How to Test Smartphone CPU and GPU Throttling
- Fix: System Interrupts High CPU Usage in Windows 10
- AMD Ryzen Vs Intel – Which CPU is The Best for Gaming
- What is Graphics Card Sagging? How to Fix GPU Sag issue?
- Fix: Video Card Stopped Responding While Playing Any Games
